Terex 21943 Large Bore Straight Power Chute Lift Cylinder

- Seal Kit = 31666
- Pins (2ea) = 19205
- Cotter Pins (2ea) = 19060
- Tee Fitting = 12180
- Elbow Fitting = 12152
- When 21943 cylinders are used between the main chute and the first flip chute, one cylinder will take (2) tee fittings and the other will take (2) elbow fittings. When the 21943 cylinder is used between the first flip chute and the second flip chute, both cylinders require (2) tee fittings. While 16099 cylinders are generally used in this spot, the 21943 will also work as they are the same length and port configuration. They just have a larger bore.

- Seal Kit = 31666
- Terex Advance 21943 Power Chute Cylinders are located on Terex Concrete Mixer Power Chute assemblies from the Main Chute to the number two power chute. They are similar to the original 16099 power chute lift cylinder but have a half inch larger bore.
- 21943 has inline ports and larger bore. 16099 have inline ports and a smaller bore. 31683 is have 90 degree ports and a larger bore
- Tee Fitting = 12180
- Elbow Fitting = 12152
- When 21943 cylinders are used between the main chute and the first flip chute, one cylinder will take (2) tee fittings and the other will take (2) elbow fittings. When the 21943 cylinder is used between the first flip chute and the second flip chute, both cylinders require (2) tee fittings. While 16099 cylinders are generally used in this spot, the 21943 will also work.

Do you have a question about this product?
Ask one of our experts