MP Parts
1 (800) 881 1843
7:30am-5:30pm (EST) M-F
Account
Cart (0)
Check out our NEW parts catalogs! Check out our NEW parts catalogs!
Click on above image to zoom
Aftermarket Replacement for

Monitor Technologies 1-8301-1 Rotary Bin Level Indicator

Price

$345.42

QTY


Unit of Measurement: Each

This item is NOT eligible for returns or cancellations
Part Number: 183011

* Monitor Model KA,115VAC,2-CT,1-1/4,UL/CSA/CE
* Top Mount Plate for 1-8301-1: 1-0102
* Banana Paddle for 1-8301-1: 1-4193
* Standard Stainless Steel Three Vane Paddle: 1-4146
* Industry Leading Motor shut-off-when-in-alarm feature
* Economical and versatile

* The Monitor 1-8301-1 is Designed to be more serviceable than competing products with every component separate and replaceable. The serviceable design starts with a twist-on-twist-off cover and rugged cast aluminum construction. The dependable design reduces wear on components and the sealed bearing prolongs the life of the unit.

* We typically see the 1-8301 bin level indicators used to monitor the level of cement, flyash, slag, sand, gravel and concrete aggregates in the ready mix concrete industry. When the unit is mounted on top of a cement or fly ash silo, we typically see it mounted with the 1-0102 top plate with a 1-4146 paddle and 3 to 5 feet of extension pipe. The extension pipes can be ordered by part number 1-1175-1-length in inches. Popular sizes can be found on the MPPM website.

Power: 115 volts AC and other voltages available

Mounting: 1-1/4" npt

Available:
Top mount, side mount for cement and flyash
High level, low level, middle level
With aluminum shaft and stainless steel paddles
Aggregate level indicators with bracket

Replacement parts
Motors, limit switches, paddles, coupling

Question
Do you have a question about this product?
Ask one of our experts
Your Name
Enter your email or phone number for us to contact you about this product.
Please note that we cannot guarantee fitment without a part number. Please submit a full mailing address and phone number when submitting a quote request.
* Monitor Model KA,115VAC,2-CT,1-1/4,UL/CSA/CE
* Top Mount Plate for 1-8301-1: 1-0102
* Banana Paddle for 1-8301-1: 1-4193
* Standard Stainless Steel Three Vane Paddle: 1-4146
* Industry Leading Motor shut-off-when-in-alarm feature
* Economical and versatile

* The Monitor 1-8301-1 is Designed to be more serviceable than competing products with every component separate and replaceable. The serviceable design starts with a twist-on-twist-off cover and rugged cast aluminum construction. The dependable design reduces wear on components and the sealed bearing prolongs the life of the unit.

* We typically see the 1-8301 bin level indicators used to monitor the level of cement, flyash, slag, sand, gravel and concrete aggregates in the ready mix concrete industry. When the unit is mounted on top of a cement or fly ash silo, we typically see it mounted with the 1-0102 top plate with a 1-4146 paddle and 3 to 5 feet of extension pipe. The extension pipes can be ordered by part number 1-1175-1-length in inches. Popular sizes can be found on the MPPM website.

Power: 115 volts AC and other voltages available

Mounting: 1-1/4" npt

Available:
Top mount, side mount for cement and flyash
High level, low level, middle level
With aluminum shaft and stainless steel paddles

Aggregate level indicators with bracket

Replacement parts
Motors, limit switches, paddles, coupling

Question:
10/27/22
How many amps does this draw
Answer:
Here is a breakdown and wiring diagram to reference.
Question:
8/24/22
I currently use a model-KA pn 1-8301-1-932 115 volt rotary bin monitor. This works just fine. What comparable item do you have in 24vDC? Would you happen to sell a 24" long extension as well?
Answer:
Hi! Here is a helpful sheet to reference.
Question:
7/19/22
Do they have a time on/ time off delay built in?
Answer:
A timer can be tied in electrically, but this unit is a constant run unless the product touches it.
Question:
12/01/21
WHAT IS THE LEAD TIME ON THIS PART
Answer:
We have a 16 week lead time on these at this time.
Question:
11/29/21
Does the product run the motor on its own constantly or does it run in intervals?
Answer:
This runs constantly till it hits product.
Question:
9/16/21
do you have stock on 4 of each of the following?Monitor part numbers18301114145
Answer:
183011 is on national back order, 14145 2-3 days direct from the vendor
Question:
7/16/21
what is standard length of shaft without extension
Answer:
There is no length, the paddle connects to Bin Level Indicator. Please take a look at this schematic for more info.
Question:
5/13/21
I have a Monitor Bindicator KA we use in our shavings hopper. We use the flex coupling with a 4-vane paddle. It has failed. Can this replace it? When the shavings start to back up they stop the vane from turning setting off the alarm. I saw this is used for concrete, etc but will iwood shavings be enough to set it off? They are for the KA unit I have now. Also, do any vanes come with the unit or are they purchased separately? Thanks
Answer:
We would need the actual part number off the unit you are trying to replace to be able to cross reference. And then we would also be able to tell you if the unit is complete or if the vanes are separate. Please email me at info@mpparts.com with your part number and I will get your info to our sales team! Thanks so much!
Related Products
Technical Information
* Monitor Model KA,115VAC,2-CT,1-1/4,UL/CSA/CE
* Top Mount Plate for 1-8301-1: 1-0102
* Banana Paddle for 1-8301-1: 1-4193
* Standard Stainless Steel Three Vane Paddle: 1-4146
* Industry Leading Motor shut-off-when-in-alarm feature
* Economical and versatile

* The Monitor 1-8301-1 is Designed to be more serviceable than competing products with every component separate and replaceable. The serviceable design starts with a twist-on-twist-off cover and rugged cast aluminum construction. The dependable design reduces wear on components and the sealed bearing prolongs the life of the unit.

* We typically see the 1-8301 bin level indicators used to monitor the level of cement, flyash, slag, sand, gravel and concrete aggregates in the ready mix concrete industry. When the unit is mounted on top of a cement or fly ash silo, we typically see it mounted with the 1-0102 top plate with a 1-4146 paddle and 3 to 5 feet of extension pipe. The extension pipes can be ordered by part number 1-1175-1-length in inches. Popular sizes can be found on the MPPM website.

Power: 115 volts AC and other voltages available

Mounting: 1-1/4" npt

Available:
Top mount, side mount for cement and flyash
High level, low level, middle level
With aluminum shaft and stainless steel paddles

Aggregate level indicators with bracket

Replacement parts
Motors, limit switches, paddles, coupling

About Us

Mixer and Plant Parts is a family owned and operated business serving the ready mix concrete and heavy trucking industries. We understand the importance of fast, accurate service to keep your concrete up and running. Let us be your partner in pouring a brighter future. Read More >>


My Account

Quick Links

Contacts

Toll Free: 1 (800) 881 1843
Fax: 1 (586) 601 1904

1843 Tucker Street,
Rock Hill, SC 29730

1011 Oakmead Drive,
Arlington, TX 76011

955 Ken-O-Sha Industrial Drive SE,
Grand Rapids, MI 49508