Check out our NEW parts catalogs!
Check out our NEW parts catalogs!
Click on image to zoom
Aftermarket Replacement for
Part Number: GH001
GH001 Tilt Mixer Concrete Loading Hopper Assembly
Unit of Measurement: Each
This item is NOT eligible for returns or cancellations
12 Cubic Yard Concrete Holding Hopper often referred to as a Gob Hopper:
* Asymmetrical designed cone for reduced concrete bridging.
* Minimum 50 degree cone transitioning to 60 degree maximum for improved material flow.
* 3/8 Inch plate on sloped sides and 1/4 Inch plate on vertical sides.
* 1/4 Inch Abrasion Resistant liners on sloped sides.
* (1) 18 Inch diameter clamshell gate utilizing replaceable grease type pivot-pins, brass bushings and precision cut gears with air cylinder and solenoid. Solenoid is shipped loose for customer installation.
* All equipment is treated with a zinc primer and painted with polyester polyurethane paint.
* Customer to furnish the controls and required control cable.
Do you have a question about this product?
Ask one of our experts
Ask one of our experts
Technical Information
12 Cubic Yard Concrete Holding Hopper often referred to as a Gob Hopper:
* Asymmetrical designed cone for reduced concrete bridging.
* Minimum 50 degree cone transitioning to 60 degree maximum for improved material flow.
* 3/8 Inch plate on sloped sides and 1/4 Inch plate on vertical sides.
* 1/4 Inch Abrasion Resistant liners on sloped sides.
* (1) 18 Inch diameter clamshell gate utilizing replaceable grease type pivot-pins, brass bushings and precision cut gears with air cylinder and solenoid. Solenoid is shipped loose for customer installation.
* All equipment is treated with a zinc primer and painted with polyester polyurethane paint.
* Customer to furnish the controls and required control cable.
* Asymmetrical designed cone for reduced concrete bridging.
* Minimum 50 degree cone transitioning to 60 degree maximum for improved material flow.
* 3/8 Inch plate on sloped sides and 1/4 Inch plate on vertical sides.
* 1/4 Inch Abrasion Resistant liners on sloped sides.
* (1) 18 Inch diameter clamshell gate utilizing replaceable grease type pivot-pins, brass bushings and precision cut gears with air cylinder and solenoid. Solenoid is shipped loose for customer installation.
* All equipment is treated with a zinc primer and painted with polyester polyurethane paint.
* Customer to furnish the controls and required control cable.