IHC / International 1699742C91 Tilt Turn Signal Switch Kit - 1685611C1

how do you remove the stem?

Should just pull off

do you have an electrical diagram for this switch? THANK YOU

Hi! Here is a helpful sheet to reference.

Thanks for your help with the stem. I can answer another recent question. The gentleman asks if you know where to find the plug harness for this switch. I found it here. https//lmr.com/item/HDW-13341B/mustang-turn-signal-connector-pigtail-83-86.Hope that helps someone out.

Thanks!

RE 1900008 - turn signal switch. Good afternoon. Does this switch include the stem?Do you sell the stem as a separate part?Many thanks.

Other customers have ordered A12958F in the past.

Hello, do you also carry the electrical connectors that plug into this switch? mine are damaged. Thanks

We cannot find any information on these.

I have a 2003 DSDP RV. When I turn on the hazard switch or either the right or left turn signals all of my lights are flashing. Front and rear turn signal, running light, 4 way flashers, brake lights. I replaced the hazard relay same problem. i believe that the hazard circuit is getting a feed back from the turn signals

Hi! That does not sound like a safe issue! If you can send me a part number you are looking to replace at info@mpparts.com, I can help you cross reference and get your lights working again!

Is there a printout available for this switch?

Hi, thanks for your question! We did find this printout for you. We are loading this to the site for direct viewing, but in the meantime, please use this link https://s3.us-west-2.amazonaws.com/cdn.mpparts.com/pdfs/Tilt_Turn_Signal_Switch_Kit.pdf. Let us know if theres anything else we can do!

The number on my Autotech turn signal switch on the tilt wheel column cover is part number 9001059 The control number is M484350, will part no 900008 work on this application?

Our apologies, we cannot confirm this. Let us know if you find out and we will add it to our data!