Badger Meter 255315-0002 Concrete Truck Meter
Badger Meter MEASURE RITE MR-1P (Pulse Output) Concrete Truck Meter - 1"
Pressure Rating:
400 psig (28 bar) (Class 250),
225 psig at 180° F (15 bar at 82° C)
Max Ambient Temperature:
140° F (60° C)
Accuracy:
The Badger Meter MEASURE RITE MR-1P (Pulse Output) Truck Meter is used to measure temper and slump-rack water. The meter is also suitable for adding water for front and rear discharge mixers or for use on mixers with fleet management systems. The unit is user-friendly with single button operation for zero reset and calibration. This unit is truck mounted and resists vibration to allow for accurate tracking of all add-water by the driver, accurately measures and dispenses water for premixed batches at the job site, and helps minimize mix errors and batch waste.
OPERATION:
The ladder platform area is the ideal mounting location for the truck meter, just upstream (and in line with) the water manifold. Verify that any movement of the platform will not cause the meter to contact the barrel or other components.
APPLICATIONS:
The truck mount meter accurately measures the amount of added water for adjusting slump.
FEATURES:
• Air slug tolerant - Resists damage caused by air slug flow
• Highly rugged and durable
• Can withstand direct hose-spray washdown
• Can be blown dry
• Compact and user friendly
• Easy to install
• Easy to calibrate / Calibration is in pounds for compliance with ALDOT procedures
• Single button operation
OPTIONS:
• Mounting Bracket
• Ball Valve (mount 6" downstream of meter)
• Upstream Strainer (60 Mesh recommended at least 12" upstream of valve)
• Vertical Front Panel Rotation
• Tees, along with a variety of bearings and seals materials (Consult Factory)
Uses:
• Metering Site Add-Water for Rear Discharge Mixers
• Metering Site Add-Water for Front Discharge Mixers
• Metering On Mixers with Fleet Management Systems
• Metering Temper and Slump-Rack Water
• Tracking Temper and Slump-Rack Water at the Control House
Ask one of our experts
Technical Information
Pressure Rating:
400 psig (28 bar) (Class 250),
225 psig at 180? F (15 bar at 82? C)
Max Ambient Temperature:
140? F (60? C)
Accuracy:
?1% or better (within flow range) when properly calibrated
Meter Size & Flow Range:
1" NPT 15?60 gpm (57?227 lpm)
MATERIALS:
Meter: Body Bronze
Impeller: 316 SST
Shaft: Tungsten Carbide
Bearings: Torlon (high performance polymer)
Electronics Housing: Coated Aluminum
Window: Tempered Glass