Terex 33405 Hydraulic Chute Swing Motor
Unit of Measurement: EachXLH Series, Spool Valve
PRODUCT M XCEL Low Speed High Torque Motor
PRODUCT SERIES CH XLH
DISPLACEMENT CC/R 100 100 CM3/R [6.2 IN3/R]
MOUNTING FLANGE AC 2 BOLT STANDARD, 82.50[3.248] DIA. X 2.8[.11] PILOT, 2-13.5[.535] DIA. MOUNTING HOLES ON 106.4[4.187] DIA. BOLT CIRCLE
OUTPUT SHAFT 05 25.4 [1.00] DIA. STRAIGHT, PARALLEL KEY, .250-20 UNC-2B HOLE IN SHAFT END
MAIN PORTS AE STAGGERED PORTS, 2-.875-14UNF-2B O-RING OR MANIFOLD PORTS WITH 4-M8-6H MOUNTING HOLES
CASE DRAIN OPTIONS 0 NONE
GEROTOR OPTIONS 1 NONE
SHAFT OPTIONS 0 NONE
SEAL OPTIONS 00 STANDARD SEALS
SPEED SENSOR OPTIONS 0 NONE
MANIFOLD BLOCK OPTIONS A NONE
SPECIAL FEATURES (HARDWARE) 00 NONE
SPECIAL ASSEMBLY INSTRUCTIONS 0 NONE
PAINT C BLACK PRIMER
ASSIGNED CODE WHEN APPLICABLE 00 NONE
DESIGN CODE B SECOND (2)
- 11842 is the gasket for this motor
Ask one of our experts
Technical Information
- 11482 is the gasket for this motor
- For 2013 and newer trucks or trucks with updated 32253 double bearing chute races. Can use either 33405 or 39098
- 2010 and older trucks with single roller bearing chute races (24040 / 17153) requiring more power must use 11428